Gibson Home Refilling and Troubleshooting CPSIA Certificates MSDS Forms Contact Us
divider organge
Glogo

Gibson Enterprises

Refill Instructions for Butane Lighters

RECOMMENDED BUTANE: Purchase readily available butane gas from your local store and follow the instructions and safety warnings on the can.

1. IF YOU HAVE TURNED UP THE ADJUSTMENT SCREW, WHEEL OR HANDLE TO INCREASE THE FLAME WHEN THE BUTANE WAS LOW, TURN IT DOWN NOW

adjust flame

On other lighters, such as the Slide Lighter, the Refill Port hole is covered by a white Safety Cover. Slide the cover to the side. This prevents the lighter from accidently igniting while you are refilling.

Rotate it a little to make sure it is engaged. Push down on the can and fill. You may need to pump it up and down slightly.

When the lighter is full, you will get a little overflow or sprayback. STOP. Remove the Butane can.

Butane will not ignite in cold temperatures. Warm your refilled lighter to room temperature before igniting.

Before lighting, turn the adjustment wheel or screw to low.

Enjoy our quality product!

fill with butane

Copyright John Gibson Enterprises, Inc. 2020